User:PEA-2292/My sandbox

From FIBIwiki
Revision as of 10:34, 30 September 2016 by PEA-2292 (talk | contribs) (Work in progress draft)
Jump to navigation Jump to search

Port Novo Iron Works

Porto Novo Iron Works 1848

In c.1830 a Mr Heath, then Agent for the East India Company (EIC) proposed the manufacture of iron based on the mineral deposits of magnetic oxide near Salem [1].

Following trials the Mr Heath formed a Company with works at Porto Novo on the Coromandel Coast at the mouth of the Vellur River to produce high quality manganese iron [1].

The ores were prepared near Salem and conveyed by water to Porto Novo. The charcoal for the works was obtained from the extensive jungle at the mouth of the Coleroon River[1].

The Port Novo Iron Works was therefore the first in India[2].

Locomotive Experiments

Captain Arthur Thomas Cotton of the Madras Engineers started experiments with steam engines in the middle of the 1830’s. He first took measurements from a static steam engine which was used to break rocks at the annicut being built across the Coleroon River about 35miles down river from Trichinopoly. The machine had been built by experiment and operated at a low pressure of 30lb/ft. It was effective and raised the hammer 30 times a minute. Which was about 1:37th HP. The experiments carried out showed what happened when cylinders sizes were altered along with the orifice sizes [3]

With this information they arranged further experiments at the Port Novo Iron Works. On the 5th May 1838 they started, by 31st May they had the workings of a locomotive. This unit never ran on rails but was used to power a lathe. It was calculated that the locomotive would run up to 22.5 mph (35Km/h) [3].

These experiments were important in the developing the Red Hill Railroad at Chintadripet by Captain Arthur Thomas Cotton which was constructed by in 1836 and opened 1837 for the conveying of granite to be used as road-building material. It was the first railway in India.

References