Scinde Railway

Scinde Railway also known as the Karachi-Kotri (Indus River) Railway
– this was the first railway of the Scinde Railway Company - see separate page for further information on the formation and development of the Company

Note

• Some documents and references refer to the ‘Sind Railway’ which is not the correct spelling.'
• Not to be confused with the ‘Sind Light Railway’ which is a separate narrow gauge railway.

Background

The Scinde Railway Company was first established by deed of settlement in March 1855 and incorporated by the ‘Scinde Railway Act’ of Parliament in July 1855 after which a contract was entered with the East India Company in December 1855.

The Company had been invited to tender in 1855 by the Government of India to build a railway from Kararchee(Karachi) to Hyderabad, to be called the Scinde Railway , this being a distance of about 120 miles(192km). The company contracted with the Government of India (GoI) to construct the initial section from Karachi to Kotri. The company was granted a 5% return on investment up to a maximum of £1 million in order to build the ‘120 mile’ line .

The London based Robert Stephenson, Consultant Engineer was approached by the 'Scinde Railway Company' for advice and in 1857 recommended John Brunton as Chief Engineer. Following Stephenson’s death in 1859 George Bidder was appointed as the Scinde Railway Consulting Engineer in London .

The Scinde Railway was one part of a communication link developed by the 'Scinde Railway Company' constructed primarily to reduce the journey time on the final stage of long haul from Britain to Delhi and Calcutta. The line from Karachi to Kotri could move cargo and passengers to Kotri instead of Karachi, saving approx 250km of circuitous journey through Indus River delta. At Kotri the line linked to the ’Indus Flotilla’ Company steamers, also owned by the ‘Scinde Railway Company’ which operated upstream to Multan . From Multan the ‘Punjaub Railway ’ ran to Amritsar where it became the ‘Delhi Railway’, both owned by the Scinde Railway Company, connected to the East Indian Railway at Ghaziabad (just east of Delhi), thus providing a connection between Karachi and Delhi and onward to Calcutta.

Construction

Scinde Railway (Karachi-Kotri)

The work commenced in April 1858 to construct the broad gauge(BG) single track railway and on 13 May 1861 succeeded in connecting the port town of Karachi to Kotri on the Indus River, the first railway line for public traffic between these towns .

The challenges faced during the construction were considerable as described in the article ‘The Line and Works of the Scinde Railway’ by John Brunton, Institution of Civil Engineers, 1862-63 .
Particular reference is given to the earthworks , a viaduct and considerable number of bridges required to be built:-

• ‘Bahrun Valley Viaduct’ The route involved construction a large stone viaduct, the heaviest piece of masonry upon the line with a length of 1,728 feet(527 metres), work commenced 1859 and completed in Jan 1861 - see separate page for further information
• 6 Viaducts with Warren Type iron girders, sent out from England, total of 43 each of 80 feet clear span. These were erected at the following rivers;- Mulleer, 21 spans; Guggur, 3 spans; Dorbagi, 2 spans; Runnpittiani, 6 spans; Loyach, 8 spans; Rhodh, 3 spans.
• 24 Bridges as follows:- 19 bridges, containing 48 arches, each of 20 feet span; 1 bridge of 3 arches of 30 ft span; 2 bridges, 10 arches of 40 ft span; 2 bridges, 4 arches of 45ft span,

Records

An on-line search of the India Office Records (IOR) records held at the British Library relating to this railway gives the following:-

• Z/E/4/25/I53; “Indus River, Railway line to be constructed from Karachi to a point on.”; 1854-55
• Z/E/4/25/R766; “Rivers, Indus, Railway line to be constructed from Karachi to a point on.”; 1854-55
• L/AG/46/17/1-13; “1. Scinde Railway Company”; 1855-1878

Personnel

Construction Engineering Management

• John Brunton; 1857, Appointed Chief Resident Engineer of Scinde Railway (Sind Railway) ; 1858-62, 'Supervised the construction of the 108 miles(174km) of the Scinde Railway between Karachi and Kotri until its completion in 1862. His detailed "Description of the line and works of the Scinde Railway" itemise the problems of building in the tropics.'
• William Arthur Brunton, the son of the above; 1857 at age 17, Assistant Engineer; then Area Surveyor on the Scinde Railway; 1859-1961, responsible for the erection of the thirty-two 45 foot (13.7M) spans of the 'Bahrun Valley Viaduct' . This is the longest bridge on the Karachi-Kotri section and is a viaduct across the Bahrun River. Construction on this bridge was started on 5 March 1859 and completed on 26 January 1861
• Willoughby Charles Furnivall District Engineer in charge of construction under John Brunton c.1860-7 .

Construction Staff - Other staff of the Scinde Railway involved during the construction are acknowledged:-

• J E Hartley; c.1859-c.1861, ‘Scinde Railway’ Resident Engineer supervising the 'Mulleer Railway Viaduct' construction
• W T Warren
• Mr Thomas Warren
• Mr J Pinder

Railway Operations Management

• Joseph Harrison, 1860-75, Engineer-in-Chief, General Agent and General Agent for some part of this time . 1864-1870 Chief Resident Engineer during construction of ‘Delhi Railway’.

Historical books online

• "The Scinde railway, and its relations to the Euphrates valley, and other routes to India" by W P Andrews, Chairman of the Scinde Railway Company 1856 Google Books
• "Report of proceedings of an extraordinary general meeting of the Scinde Railway Company, held on Friday the 24th July, 1857" Google Books
• "Description of the Line and Works of the Scinde Railway" by John Brunton. 1863. Google Books

Further Information

• See Scinde Railway Company,
  • Indus Flotilla
  • Punjaub Railway
  • Delhi Railway
• and Scinde, Punjaub & Delhi Railway following amalgamation in 1870 until 1886
• and North Western Railway from 1886 when the line became part of the ‘NWR Mainline’